The stock adaptor assembly is specifically made to upgrade the Panzer AR12 Gen 1 and 2 Side-Pin Polymer Shotgun. However, it may be adaptable to other makes or models.
How we make the adaptor
The stock adaptor for your Panzer AR12 Gen 1 and 2 Side-Pin Polymer Shotgun upgrade is made in the USA. These parts are manufactured using a CNC mill. 6061T6 aluminum is the material we use for both parts. We machine it to tight tolerances and bead blast to a matte finish. The product is then black anodized via Russel Products in Akron, Ohio https://www.russprodco.com/. In order to install the stock, the adaptor needs the Buffer Tube Adaptor addition. Therefore, allowing connection between the adaptor and the buffer tube.
How to Install
In order to install the Side Pin Stock Adaptor you first need to remove the plastic cover on the side of the stock, to expose the bolt by gently prying plastic piece from stock with a flat head screw. Next, take an Allen wrench to remove the socket cap screw from the side of the stock. Remove the O.E.M. stock. Then install the adaptor assembly until flush with the back of the gun. After that is put in place, install a 5/16-18 button head screw and tighten so there is no play in the adaptor assembly. Finally, install the buffer tube, castle nut, and stock of your choice.
Have more questions?
The instructions sheet for the Panzer AR 12 Gen 1 and 2 Side-Pin Stock Adaptor Assembly upgrade is located on the 922r Rule page https://ar-shotgun.com/922r-rule/. All of the Panzer AR 12 Gen 1 and 2 Side-Pin parts are shipped with an instruction sheet, for your convenience. For more instructions to help you assemble the parts visit https://ar-shotgun.com/instructions/. If you have more questions about your Panzer AR 12 Gen 1 and 2 Side-Pin Shotgun Stock Upgrade, feel free to email us at firstname.lastname@example.org, give us a call at (352)547-9437, or better yet visit us during normal business hours. Our address is located in Massillon, Ohio at 1200 Cleveland St SW.