The Landor Arms Stock Adaptor upgrade allows for the installation of a collapsible stock. All bolts are included. However, the buffer tube adaptor, stock, castle nut, and buffer tube will need to be purchased separately.
How we make the adaptor.
The stock adaptor for your Landor Arms Shotgun stock upgrade is made in the USA. These parts are manufactured using a CNC mill. 6061T6 aluminum is the material we use for both parts. We machine it to tight tolerances and bead blast to a matte finish. The product is then black anodized via Russel Products in Akron, Ohio https://www.russprodco.com/. In order to install the stock, the adaptor needs the Buffer Tube Adaptor addition. Therefore, allowing connection between the adaptor and the buffer tube. If you need to purchase the buffer tube adaptor, you may purchase the stock adaptor assembly on our product page: https://ar-shotgun.com/product/landor-arms-stock-adaptor-assembly/.
How to Install.
Your Shotgun will need to be cut one inch from the lower to install the adaptor. The adaptor will fit right into the lower. You will then want to screw the adaptor in place and attach the buffer tube adaptor. Next, use the set screw to ensure the buffer tube adaptor will not move once installed, creating a snug fit. Once both of the adaptors are screwed into place the buffer tube and stock are ready to be put on.
Have more questions?
The instructions sheet for the Landor Arms Stock Adaptor upgrade is located on the 922r Rule page https://ar-shotgun.com/922r-rule/. Each of the Landor parts are shipped with an instruction sheet, for your convenience. For more instructions to help you assemble the parts visit https://ar-shotgun.com/instructions/. If you have more questions about your Landor Arms Shotgun Stock Upgrade, feel free to email us at firstname.lastname@example.org, give us a call at (352)547-9437, or better yet visit us during normal business hours. Our address is located in Massillon, Ohio at 1200 Cleveland St SW.